Product
Stair Indoor & Outdoor Professional Interactive LED Display Screen
Product Introduction
The LED stair screen independently developed by AOE adopts PC material (carbonate-based polymer) imported from Germany, which has high strength and elastic coefficient, high impact strength and good toughness. It can be used in a wide temperature range. High transparency and free dyeability: light brown or dark brown can be freely selected. Low molding shrinkage: good dimensional stability, low coefficient of thermal expansion and contraction. Good fatigue resistance: increased adhesive, good toughness, not easy to crack after repeated use. Good weather resistance: It is not easy to change color or crack under the change of temperature. Customized private mold, adding water guide groove, non-slip surface. The surface is frosted, wear-resistant and scratch-resistant. Increase the diffusion agent to achieve anti-dizziness, anti-UV, and increase the safety of guests.
The floor screen needs to be waterproofed regardless of whether it is indoors or outdoors. Our company’s indoor modules completely adopt outdoor standards. The screw holes are sealed with three-proof glue to ensure moisture-proof, waterproof and dust-proof to the greatest extent. The waterproof and dustproof coefficient of the surface can reach IP54 for the indoor model, and the front and back of the outdoor model have IP67 protection level. The adhesives are added to the load-bearing columns material to ensure the toughness and strength of the load-bearing columns, not only can it guarantee the weight, but it can also ensure that the tension generated when the heavy object goes up and down ensures that the column does not break (the tension will cause the column to break, and after the break, the module will crack when the weight is removed and put on it again) .
In order to ensure the load-bearing requirements, the panel is made of sheet metal with a national standard foot of 1.50mm and a thickness of 1.80mm after spraying. The force is distributed evenly on the whole box, not on several points. The back cover of the control box is made of pure aluminum, which ensures heat dissipation to the greatest extent. Waterproof beading is used around the back cover to ensure that water vapor on the ground cannot enter the control box. The floor support is made of galvanized floor support instead of hard plastic, which increases the load-bearing effect. A single signal box is connected to a single module. The inside of the box is sealed with waterproof beading, and the outside of the box is fully sealed with glue to ensure that the water vapor on the ground cannot enter the signal box and the module. All screw holes and joints are filled with glue and sealed. The control box is made of aluminum, which ensures heat dissipation to the greatest extent. The connection between the control box and the back cover adopts waterproof beading to ensure that the water vapor on the ground cannot enter the control box; the outer connection of the back cover is again sealed with glue.
Product Fetures
Product Details
Product Specification
Indoor & Outdoor LED Stair Specification
| Pixel | P4.68 |
| Module composition | |
| Pixel composition | SMD LED 1R, 1G, 1B |
| Pixel pitch（W*H）mm | 4.68*4.68 |
| Module resolution（W*H） | 64*32 |
| Module size（W*H*D）mm | 300*150*18 |
| Module weight（KG） | 0.75 |
| Panel unit composition | |
| Contains modules qty（W*H） | 3*3 |
| Panel resolution（W*H） | 192*96 |
| Panel size（W*H*D）mm | 900*(300+150)*78 |
| Resolution（dot/㎡） | 45369 |
| Protection level | Indoor: IP54 / Outdoor: IP67 |
| Panel flatness （mm） | ≤1 |
| White balance brightness（nits） | Indoor ≥1300 / Outdoor ≥3000 |
| Color temperature（K） | 6000—9300 adjustable |
| View angle（°） | >120 |
| Electrical parameters | |
| Power consumption (A/unit module) | DC 6 ∽7 |
| Peak power consumption (W/㎡) Average power consumption (W/㎡) |
800/300 |
| Power requirements | AC220V |
| Processing performance | |
| Drive method | Constant current drive |
| Frame frequency（Hz） | 50&60 |
| Refresh @60Hz frame signal input | ≥3840 / ≥7680 |
| Use parameters | |
| Life typical value (hrs) | 100,000 |
| Work temperature(°C） | -20 — 55 |
| Storage temperature(°C） | -30 — 60 |
| Working humidity range (RH) without condensation | 10 - 90% |
| Storage humidity range (RH) without condensation | 10 - 95% |
| Defective ratio | ≤4/100000 |
| Screen surface color | Color consistency 95% (white transparent or brown) |
| Interaction | Interactive/Non-Interactive |
Application
1)Exhibition: Museum, municipal planning hall, science and Technology Museum, exhibition hall, exhibition, etc.
2)Catering industry: hotel ballroom or passageway and lobby, restaurant's ordering area or important passageway, etc.
3)Entertainment industry: basketball court, stadiums, bar counter, main channel, private room floor, etc.
4)Leasing industry: main stage of large-scale commercial performance, major events, wedding and birthday celebration, media, etc.
5)Education industry: school laboratory, pre job training, kindergarten, preschool training, special education, etc.
6)Scenic spots: Glass skywalk, reception center, recreation center, viewing platform, etc.
7)Municipal projects: Garden Road, square, etc. Monitoring center: command room, control room, etc.
8)Real estate center: Sales Center, prototype room, etc.
9)Financial center: Stock Exchange Center, headquarters of bank, etc.
10)Commercial complex: Main passageway of shopping mall, central square, courtyard, cross street bridge, children's playground, etc.
Projects
Product Intoduction
The LED stair screen independently developed by XYGLED adopts PC material (carbonate-based polymer) imported from Germany, which has high strength and elastic coefficient, high impact strength and good toughness. It can be used in a wide temperature range. High transparency and free dyeability: light brown or dark brown can be freely selected. Low molding shrinkage: good dimensional stability, low coefficient of thermal expansion and contraction. Good fatigue resistance: increased adhesive, good toughness, not easy to crack after repeated use. Good weather resistance: It is not easy to change color or crack under the change of temperature. Customized private mold, adding water guide groove, non-slip surface. The surface is frosted, wear-resistant and scratch-resistant. Increase the diffusion agent to achieve anti-dizziness, anti-UV, and increase the safety of guests.
The floor screen needs to be waterproofed regardless of whether it is indoors or outdoors. Our company’s indoor modules completely adopt outdoor standards. The screw holes are sealed with three-proof glue to ensure moisture-proof, waterproof and dust-proof to the greatest extent. The waterproof and dustproof coefficient of the surface can reach IP54 for the indoor model, and the front and back of the outdoor model have IP68 protection level. The adhesives are added to the load-bearing columns material to ensure the toughness and strength of the load-bearing columns, not only can it guarantee the weight, but it can also ensure that the tension generated when the heavy object goes up and down ensures that the column does not break (the tension will cause the column to break, and after the break, the module will crack when the weight is removed and put on it again) .
In order to ensure the load-bearing requirements, the panel is made of sheet metal with a national standard foot of 1.50mm and a thickness of 1.80mm after spraying. The force is distributed evenly on the whole box, not on several points. The back cover of the control box is made of pure aluminum, which ensures heat dissipation to the greatest extent. Waterproof beading is used around the back cover to ensure that water vapor on the ground cannot enter the control box. The floor support is made of galvanized floor support instead of hard plastic, which increases the load-bearing effect. A single signal box is connected to a single module. The inside of the box is sealed with waterproof beading, and the outside of the box is fully sealed with glue to ensure that the water vapor on the ground cannot enter the signal box and the module. All screw holes and joints are filled with glue and sealed. The control box is made of aluminum, which ensures heat dissipation to the greatest extent. The connection between the control box and the back cover adopts waterproof beading to ensure that the water vapor on the ground cannot enter the control box; the outer connection of the back cover is again sealed with glue.
Specifications
| Pixel pitch | Module size(mm) | Module resolution | Panel size(mm) | Remark | Brightness(cd) | Refresh rate |
| IS4.68 | 300*150 | 64*32 | 600*600 | Step surface | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 1200*300 | Step surface | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 900*300 | Step surface | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 600*300 | Step surface | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 1200*(300+150) | L*(W+H) | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 900*(300+150) | L*(W+H) | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 600*(300+150) | L*(W+H) | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 1200*150 | L*H | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 900*150 | L*H | 1300-1500 | 3840 |
| IS4.68 | 300*150 | 64*32 | 600*150 | L*H | 1300-1500 | 3840 |
